[WT-support] 2.3.0

[Olivier F5MZN]

Olivier F5MZN wrote:

> - click on the "configure" button associated with the COM port your 
> microham interface is connected to, then select "CW" as DTR option and 
> "PTT" as RTS option;
> 
> - still in the "Interfaces configuration" window, check "LPT1", then 
> "configure" and verify that "DVK (pin 3, 4, 5, 6)" is checked.

My mistake, my reply is not correct regarding the question! Of course, 
this is only relevant using an external DVK connected to the LPT port. 
With a microham keyer, you should rather enable the CW/PTT checkbox.

73,
-- 
Olivier / f5mzn